A rave-like desktop isn’t the look everyone prefers, but for those who do, getting all of your case, keyboard, and mouse lighting can be a bit out of sync. It’s not hard to match them all in one color or enable some cliched “breathing” effect, but that might just be how charming you can be. Most of these light control apps range from “helpful” to “awful,” especially if you are trying to get different gadgets from different manufacturers to sync and look great.
Enter SignalRGB, a third-party Windows app that does an excellent job of identifying the most popular hardware in your case — the CPU cooler, your light strips, even the LEDs in the case itself — and syncing their appearance to your keyboard, mouse, and other lit gaming gear. . SignalRGB isn’t perfect, and its premium features cost $3 per month subscription fee, but the free version of this app lets you do a lot more. You won’t go back to the Asus or Logitech utility anymore, trust us.
Set up your system for SignalRGB
To start using SignalRGB, you will need to make sure that you have uninstalled any other application on your system that might affect the lighting of your peripherals. This can include the software you use to control or configure the device. If you’re lucky, you’ll have an option in these apps to turn off the lighting controls.
Otherwise, you’ll need to get rid of the apps you use to customize keyboard hotkeys, adjust your mouse’s dpi, or mess around with some of your motherboard’s settings. You can always reinstall it later to make small adjustments, but you’ll need to uninstall it so it doesn’t interfere with SignalRGB.
After SignalRGB is installed, a prompt will appear with the “Quick Start” guide. You can check it out to get a feel for the app, but SignalRGB is easy enough to see if you want to jump right in.
Click Hardware under my dredger On the left sidebar, you will be able to see everything you own that is compatible with SignalRGB. If some LEDs don’t appear, be sure to check the SignalRGB compatibility list to make sure the app can see them.
You’ll need to make sure your devices’ firmware is updated to their latest versions – which may require you to temporarily reinstall the Console app which you’ll likely uninstall for SignalRGB. And, if possible, make sure that any light strips, controllers, or fans inside the case are connected to the motherboard’s ARGB connectors.
The app should prompt you if you have ARGB connected devices to setup. To do this, simply click on the giant plus icon that corresponds to the ARGB header you are using on your motherboard, and choose the light bar, fan or controller from the list provided.
You can also make a custom entry; Just enter the number of LEDs you control under it valve number and click Create. If you don’t know, just do a little trial and error until all the controllable LEDs show a color in your case. If you set everything up correctly, all the LEDs and controllable devices should really make your entire PC setup through a rainbow pattern of colors.
Before you move on to the next screen in SignalRGB, there’s another special trick for this hardware screen worth remembering: If the device isn’t following through with your color setting—like when your computer turns over again after sleeping—you’ll want to go back here, click Affected devices, and Turn it off and on with a file Energetic Switch at the bottom of the app. This almost always fixes any issues you encounter.
Map your devices locations
Next, tap layouts under my dredger. This screen might be a little confusing at first, but it will try to plot the location of your lighting devices so that transitions can flow smoothly from one device to the next. Yes, you will have to figure out a good way to approach the distance and height of the 3D world in a 2D plane, so this is definitely an area where you will want to do a little trial and error.
Don’t forget that you can adjust the exact size and position of a device by clicking on it and using the sliders in the far right sidebar. Click the arrow icon in a circle if you need to undo your changes and start over from the device’s default setting.
Find and install free SignalRGB themes
Finally, and most importantly, you’ll want to click free under Library To see the various topics created by the SignalRGB community for you to check out. There is no way to preview any of them, but they are super fast downloads that you can install, apply, and delete right from this screen. You just have to sign up for a free SignalRGB account first; Otherwise, this free content has no portals at all. (And if you try to download a theme that only subscribers can use, you’ll know it; the lights will all blink white and go off.)
You can install as many themes as you like, and you can customize anything you’ve downloaded by clicking adjust or adapt under my influences. What you can do is up to the creator of each effect, but you can usually adjust the accent colors, animation speed, built-in interaction with keystrokes, etc. You can save your customizations as presets in case you have some interesting ideas for your lighting setup. And returning to default settings for effects is as easy as long tapping on the icon that looks like a back key.
If you have any issues with SignalRGB, would like to petition the creators of the app to officially support one of your devices, or need help customizing the perfect RGB layout, we highly encourage you to check out the app’s Discord app. And if you need a little jolt to your creativity, you’ll find plenty of examples of amazing RGB settings from the active SignalRGB community. Borrow some ideas, and you’ll have a great synchronous RGB gaming den in no time.
The product experts at Review cover all your shopping needs. Follow the review on Facebook, Twitterand Instagram for the latest deals, product reviews, and more.
Prices were accurate at the time this article was published but may change over time.